themodelmaker

Bartholomew church model is almost ready. It needs some paint in few places, base with surrounding and display case.

All of my moulds are finished. This is my first cast assembled.  It is painted with base colours. It will take a lot of time to paint and weather it. I will describe this process later in short tutorial.

All of my moulds are finished. This is my first cast assembled.  It is painted with base colours. It will take a lot of time to paint and weather it. I will describe this process later in short tutorial.

All of my moulds are finished. This is my first cast assembled.  It is painted with base colours. It will take a lot of time to paint and weather it. I will describe this process later in short tutorial.

Most of my parts are already done. This is my first  cast assembled and primed white. You see here 9 main parts and another 8 small details. I need to pour the silicone on 2 more pieces and I can finish this model.

Most of my parts are already done. This is my first  cast assembled and primed white. You see here 9 main parts and another 8 small details. I need to pour the silicone on 2 more pieces and I can finish this model.

Most of my parts are already done. This is my first  cast assembled and primed white. You see here 9 main parts and another 8 small details. I need to pour the silicone on 2 more pieces and I can finish this model.

This is my favourite part of the building. I think that asymmetrical tower captured my attention when I was passing by that church. It has 8  little columns on the perimeter and looked complicated at first moment, but it was very easy to make.

I started with 50 cross sections laser cut in 1.5mm cardboard. Then  filled spaces between pillars with green stuff and sculpted stone. It will be primed later and cast as single resin part.

This is my favourite part of the building. I think that asymmetrical tower captured my attention when I was passing by that church. It has 8  little columns on the perimeter and looked complicated at first moment, but it was very easy to make.

I started with 50 cross sections laser cut in 1.5mm cardboard. Then  filled spaces between pillars with green stuff and sculpted stone. It will be primed later and cast as single resin part.

This is my favourite part of the building. I think that asymmetrical tower captured my attention when I was passing by that church. It has 8  little columns on the perimeter and looked complicated at first moment, but it was very easy to make.

I started with 50 cross sections laser cut in 1.5mm cardboard. Then  filled spaces between pillars with green stuff and sculpted stone. It will be primed later and cast as single resin part.

Those are my first casts of 3 finished parts.  I used polyurethane Axson F16 resin. Very quick de-moulding time (2.5m pot life, de-mould 20 – 30 minutes).  It has low viscosity so  it flows like water to all details.  Silicone mould rubber T20. Its hard to get those materials here in Dublin so I ordered it at http://www.tiranti.co.uk.  It arrived quickly and well packed. The bad surprise was delivery cost over 20£ for 4 kg parcel.

Those are my first casts of 3 finished parts.  I used polyurethane Axson F16 resin. Very quick de-moulding time (2.5m pot life, de-mould 20 – 30 minutes).  It has low viscosity so  it flows like water to all details.  Silicone mould rubber T20. Its hard to get those materials here in Dublin so I ordered it at http://www.tiranti.co.uk.  It arrived quickly and well packed. The bad surprise was delivery cost over 20£ for 4 kg parcel.

Those are my first casts of 3 finished parts.  I used polyurethane Axson F16 resin. Very quick de-moulding time (2.5m pot life, de-mould 20 – 30 minutes).  It has low viscosity so  it flows like water to all details.  Silicone mould rubber T20. Its hard to get those materials here in Dublin so I ordered it at http://www.tiranti.co.uk.  It arrived quickly and well packed. The bad surprise was delivery cost over 20£ for 4 kg parcel.

This is the project I am working at the moment. It is Saint Bartholomew Church on the Clyde Road located in Balsbridge in Dublin. When I first saw this building few months ago, something captured my attention. Was it the location? Its stands on the triangular land surrounded by red brick houses converted to embassies. Hard to believe that when it was built in 1867 it was open fields.

The church was designed by an English architect, Thomas Henry Wyatt in a Gothic Revival for Sidney Herbert, of the Earls of Pembroke. The original design was never completed, the unusual octagonal tower never received its intended spire.

I am building the laser cut cardboard master in scale 1:160 (N scale). I am going to make moulds of finished pieces and cast it in resin. I will see how many copies my moulds can handle. I will offer them on eBay sometime in future. That will be very limited edition. If anyone is interested, send me an e-mail: architecturalmodelmaker@gmail.com or check this blog to see the progress.

This is the project I am working at the moment. It is Saint Bartholomew Church on the Clyde Road located in Balsbridge in Dublin. When I first saw this building few months ago, something captured my attention. Was it the location? Its stands on the triangular land surrounded by red brick houses converted to embassies. Hard to believe that when it was built in 1867 it was open fields.

The church was designed by an English architect, Thomas Henry Wyatt in a Gothic Revival for Sidney Herbert, of the Earls of Pembroke. The original design was never completed, the unusual octagonal tower never received its intended spire.

I am building the laser cut cardboard master in scale 1:160 (N scale). I am going to make moulds of finished pieces and cast it in resin. I will see how many copies my moulds can handle. I will offer them on eBay sometime in future. That will be very limited edition. If anyone is interested, send me an e-mail: architecturalmodelmaker@gmail.com or check this blog to see the progress.

This is the project I am working at the moment. It is Saint Bartholomew Church on the Clyde Road located in Balsbridge in Dublin. When I first saw this building few months ago, something captured my attention. Was it the location? Its stands on the triangular land surrounded by red brick houses converted to embassies. Hard to believe that when it was built in 1867 it was open fields.

The church was designed by an English architect, Thomas Henry Wyatt in a Gothic Revival for Sidney Herbert, of the Earls of Pembroke. The original design was never completed, the unusual octagonal tower never received its intended spire.

I am building the laser cut cardboard master in scale 1:160 (N scale). I am going to make moulds of finished pieces and cast it in resin. I will see how many copies my moulds can handle. I will offer them on eBay sometime in future. That will be very limited edition. If anyone is interested, send me an e-mail: architecturalmodelmaker@gmail.com or check this blog to see the progress.