themodelmaker

I was commissioned by one gentleman to make this custom engagement ring box. His girlfriend and now fiancee is a big fan of movie “Up” and all Disney related. I thought he has a great idea so I crafted it for him. I used the design of my first miniature in scale 1:160. Its modified a little so it opens at the bottom. It is made of cardboard with red fabric inside. The ring on the picture is not an engagement ring, its the biggest ring I could find in my girlfriends drawer just for this presentation. The box was shipped to USA safely and they are already engaged.

I wish you Gennady and Maggie all the best, long and happy life together. Have a great wedding!!!

This is a custom munny I made for kidrobot’s munny competition. I wanted to sculpt a lot with this one. Original toy’s hand reminded me boxing gloves so I started to think about boxing stars. The first thing on my mind was Rocky Balboa, one of the heroes of my childhood I did some research and found this brilliant caricature painted by Sebastian Kruger. I imediatelly saw the Sylwester’s face on munnys head. I needed to extend it verticaly and create huge jaw using munnys ears as a base. It looked like a challenge, so I decided to do it. Here you can see some progress photos.

The body is from 7 inches DIY toy, but the head is taken from  mini munny. All figure measures 25 cm. Its painted with spray paints and airbrushed acrylics.

UPDATE 15 JULY 2010:  This little guy won second place in “best movie event reenactment” category at Munny Munth Contest !!! Thanks for all who voters, supporters and contestants. You chan check other winning entries here

I played a little with munny customization. This is second mini munny I customized. Its 4 inches tall. I used DIY canvas toy from Kidrobot’s mini munny series – Bub. His body looked like shrek  right from the beginning. I just cut his ears and add nose chin and new ears so it looks more like shrek from dreamwork’s animation. Its painted with montana sprays and acrylics.  It was great fun making it. I became addicted to customization and ordered 8 more munnys, so few more toys will follow.

Finished sculpt of Ellie from Disney/Pixar animation Up to fit the dollhouse. She is going for adventures with Carl and Russell in their flying house. My alternative happy ending

This is second character I sculpted to fit the 1:48 dollhouse I made before. He is made of epoxy putty and painted with acrylics. He is 28mm tall. I used Hot Toys figure as reference, but I am not planning to make his rucksack, he wouldnt be able to stand on his legs then. My next figurine is Ellie. She is already sculpted and waiting for colours, I will post it in few days so visit soon

Few photos of my recent weekend project. This is a 33mm tall figurine of Carl Fredricksen from Disney/Pixar animation “Up” made in scale 1:48 to match the dollhouse I made recently. I sculpted it in two parts epoxy putty, you can buy it in every hardware store. I used the one with 5 minutes working time, it means I had to work fast and on small areas, and I could quickly make corrections with sharp knife. Glasses are made of 0.25mm styrene. All is painted with acrylic paints from Valleyo and Games Workshop range of colours and later sprayed with matt varnish. It was fun to make it.

If you are looking to buy a figurine of Carl or Russel, I would recommend collectible vinyl toy from Hot Toys. If you need something cheap for your child, I found good quality little figurines from german producer Bullyland.

Few photos of my current project. Its house from animated movie Coraline. Its in scale 1:160, made of paper and cardboard. Its still work in progress. My next stage is paint roof, fix gutters make base with terrain, porch and finally add all remaining details.

Here you have few pictures of my finished scale model of Carl’s little flying victorian house from new Disney Pixar animation Up.

Here you have few pictures of my finished scale model of Carl’s little flying victorian house from new Disney Pixar animation Up.

Here you have few pictures of my finished scale model of Carl’s little flying victorian house from new Disney Pixar animation Up.

Here you have the most recent addition to my model collection. This is N-scale scratchbuilt model of flying house from the new  Pixar movie “Up”. I haven’t seen the movie yet (still not open in cinemas in Ireland) but I loved the trailer and this colorful piece of architecture.  I needed to have it in real 3d…  The design was simple, I based on pictures, movies from youtube and cut out toy from official Disney Pixar website. I started last Friday, all parts were ready on Saturday. It was going to be weekend project. So far its two weekends project and I am not yet satisfied with my paint job. I will post more photos from different angles later.

I was asked by people from forum pixarplanet.com how was it made and blueprints. Here are my drawings with all of my parts to give you better idea what was involved in process of creating it.

First drawing is prepared to be cut on 1.5mm cardboard. The blue lines are cut to 0.5 mm,  yellow is the engraving of panels on the door. I glued the parts together, I prepared little holes and joints, so all walls are at right angles and in exact positions and its quite rigid construction.

Second page is cut on 0.5 paper. Its another layer to cover joints and create window frames. I engraved the boards on the walls, but later decided that I want better 3d effect, so I covered it with overlapping stripes of paper.

Last page is with 3 types of shingles and boards for wall and is cut out of 0.3mm paper.  If you have any questions, feel free to ask on my email or post a comment.

Here you have the most recent addition to my model collection. This is N-scale scratchbuilt model of flying house from the new  Pixar movie “Up”. I haven’t seen the movie yet (still not open in cinemas in Ireland) but I loved the trailer and this colorful piece of architecture.  I needed to have it in real 3d…  The design was simple, I based on pictures, movies from youtube and cut out toy from official Disney Pixar website. I started last Friday, all parts were ready on Saturday. It was going to be weekend project. So far its two weekends project and I am not yet satisfied with my paint job. I will post more photos from different angles later.

I was asked by people from forum pixarplanet.com how was it made and blueprints. Here are my drawings with all of my parts to give you better idea what was involved in process of creating it.

First drawing is prepared to be cut on 1.5mm cardboard. The blue lines are cut to 0.5 mm,  yellow is the engraving of panels on the door. I glued the parts together, I prepared little holes and joints, so all walls are at right angles and in exact positions and its quite rigid construction.

Second page is cut on 0.5 paper. Its another layer to cover joints and create window frames. I engraved the boards on the walls, but later decided that I want better 3d effect, so I covered it with overlapping stripes of paper.

Last page is with 3 types of shingles and boards for wall and is cut out of 0.3mm paper.  If you have any questions, feel free to ask on my email or post a comment.

Here you have the most recent addition to my model collection. This is N-scale scratchbuilt model of flying house from the new  Pixar movie “Up”. I haven’t seen the movie yet (still not open in cinemas in Ireland) but I loved the trailer and this colorful piece of architecture.  I needed to have it in real 3d…  The design was simple, I based on pictures, movies from youtube and cut out toy from official Disney Pixar website. I started last Friday, all parts were ready on Saturday. It was going to be weekend project. So far its two weekends project and I am not yet satisfied with my paint job. I will post more photos from different angles later.

I was asked by people from forum pixarplanet.com how was it made and blueprints. Here are my drawings with all of my parts to give you better idea what was involved in process of creating it.

First drawing is prepared to be cut on 1.5mm cardboard. The blue lines are cut to 0.5 mm,  yellow is the engraving of panels on the door. I glued the parts together, I prepared little holes and joints, so all walls are at right angles and in exact positions and its quite rigid construction.

Second page is cut on 0.5 paper. Its another layer to cover joints and create window frames. I engraved the boards on the walls, but later decided that I want better 3d effect, so I covered it with overlapping stripes of paper.

Last page is with 3 types of shingles and boards for wall and is cut out of 0.3mm paper.  If you have any questions, feel free to ask on my email or post a comment.