themodelmaker

I made another two elevations for city battles for Flames of War strategy game. Its based on survey drawings made by students of architecture so its quite accurate. I always wanted to create very detailed table showing destroyed city. its going to be very labour intensive, so I would like to start with one street at the moment. Those buildings will be the part of historical city centre.

Dwie nowe elewacje do walk w miescie do Flames of War gotowe. Zbudowalem je na bazie rysunkow z inwentaryzacji na potrzeby konserwacji zabytkow na studiach architektry, wiec sa historycznie dokladne. Zawsze chcialem zbudowac makiete zniszczonego miasta, bardzo ambitne zadanie i dosc pracochlonne. Zaczne wiec od jednej ulicy i jak czas pozwoli, zbuduje caly stol do walk w miescie.

This is a finished Flames of War terrain or for other 15mm game or diorama. It will be relased as resin kit and will be avaliable here or on my ebay auction.

Bartholomew church model is almost ready. It needs some paint in few places, base with surrounding and display case.

I cut this elevation few weekends ago. My friend from university sent me his survey drawing of  this beautiful tenement-house in Poland. I thought it may be a nice element for the wargame table or diorama. I am going to make damaged version of this building   in the near future. It will be in scale 1:100 to fit the Flames of War figures.

I cut this elevation few weekends ago. My friend from university sent me his survey drawing of  this beautiful tenement-house in Poland. I thought it may be a nice element for the wargame table or diorama. I am going to make damaged version of this building   in the near future. It will be in scale 1:100 to fit the Flames of War figures.

I cut this elevation few weekends ago. My friend from university sent me his survey drawing of  this beautiful tenement-house in Poland. I thought it may be a nice element for the wargame table or diorama. I am going to make damaged version of this building   in the near future. It will be in scale 1:100 to fit the Flames of War figures.

Those are my first casts of 3 finished parts.  I used polyurethane Axson F16 resin. Very quick de-moulding time (2.5m pot life, de-mould 20 – 30 minutes).  It has low viscosity so  it flows like water to all details.  Silicone mould rubber T20. Its hard to get those materials here in Dublin so I ordered it at http://www.tiranti.co.uk.  It arrived quickly and well packed. The bad surprise was delivery cost over 20£ for 4 kg parcel.

Those are my first casts of 3 finished parts.  I used polyurethane Axson F16 resin. Very quick de-moulding time (2.5m pot life, de-mould 20 – 30 minutes).  It has low viscosity so  it flows like water to all details.  Silicone mould rubber T20. Its hard to get those materials here in Dublin so I ordered it at http://www.tiranti.co.uk.  It arrived quickly and well packed. The bad surprise was delivery cost over 20£ for 4 kg parcel.

Those are my first casts of 3 finished parts.  I used polyurethane Axson F16 resin. Very quick de-moulding time (2.5m pot life, de-mould 20 – 30 minutes).  It has low viscosity so  it flows like water to all details.  Silicone mould rubber T20. Its hard to get those materials here in Dublin so I ordered it at http://www.tiranti.co.uk.  It arrived quickly and well packed. The bad surprise was delivery cost over 20£ for 4 kg parcel.