themodelmaker

I made another two elevations for city battles for Flames of War strategy game. Its based on survey drawings made by students of architecture so its quite accurate. I always wanted to create very detailed table showing destroyed city. its going to be very labour intensive, so I would like to start with one street at the moment. Those buildings will be the part of historical city centre.

Dwie nowe elewacje do walk w miescie do Flames of War gotowe. Zbudowalem je na bazie rysunkow z inwentaryzacji na potrzeby konserwacji zabytkow na studiach architektry, wiec sa historycznie dokladne. Zawsze chcialem zbudowac makiete zniszczonego miasta, bardzo ambitne zadanie i dosc pracochlonne. Zaczne wiec od jednej ulicy i jak czas pozwoli, zbuduje caly stol do walk w miescie.

Bartholomew church model is almost ready. It needs some paint in few places, base with surrounding and display case.

Few photos of my current project. Its house from animated movie Coraline. Its in scale 1:160, made of paper and cardboard. Its still work in progress. My next stage is paint roof, fix gutters make base with terrain, porch and finally add all remaining details.

Here you have the most recent addition to my model collection. This is N-scale scratchbuilt model of flying house from the new  Pixar movie “Up”. I haven’t seen the movie yet (still not open in cinemas in Ireland) but I loved the trailer and this colorful piece of architecture.  I needed to have it in real 3d…  The design was simple, I based on pictures, movies from youtube and cut out toy from official Disney Pixar website. I started last Friday, all parts were ready on Saturday. It was going to be weekend project. So far its two weekends project and I am not yet satisfied with my paint job. I will post more photos from different angles later.

I was asked by people from forum pixarplanet.com how was it made and blueprints. Here are my drawings with all of my parts to give you better idea what was involved in process of creating it.

First drawing is prepared to be cut on 1.5mm cardboard. The blue lines are cut to 0.5 mm,  yellow is the engraving of panels on the door. I glued the parts together, I prepared little holes and joints, so all walls are at right angles and in exact positions and its quite rigid construction.

Second page is cut on 0.5 paper. Its another layer to cover joints and create window frames. I engraved the boards on the walls, but later decided that I want better 3d effect, so I covered it with overlapping stripes of paper.

Last page is with 3 types of shingles and boards for wall and is cut out of 0.3mm paper.  If you have any questions, feel free to ask on my email or post a comment.

Here you have the most recent addition to my model collection. This is N-scale scratchbuilt model of flying house from the new  Pixar movie “Up”. I haven’t seen the movie yet (still not open in cinemas in Ireland) but I loved the trailer and this colorful piece of architecture.  I needed to have it in real 3d…  The design was simple, I based on pictures, movies from youtube and cut out toy from official Disney Pixar website. I started last Friday, all parts were ready on Saturday. It was going to be weekend project. So far its two weekends project and I am not yet satisfied with my paint job. I will post more photos from different angles later.

I was asked by people from forum pixarplanet.com how was it made and blueprints. Here are my drawings with all of my parts to give you better idea what was involved in process of creating it.

First drawing is prepared to be cut on 1.5mm cardboard. The blue lines are cut to 0.5 mm,  yellow is the engraving of panels on the door. I glued the parts together, I prepared little holes and joints, so all walls are at right angles and in exact positions and its quite rigid construction.

Second page is cut on 0.5 paper. Its another layer to cover joints and create window frames. I engraved the boards on the walls, but later decided that I want better 3d effect, so I covered it with overlapping stripes of paper.

Last page is with 3 types of shingles and boards for wall and is cut out of 0.3mm paper.  If you have any questions, feel free to ask on my email or post a comment.

Here you have the most recent addition to my model collection. This is N-scale scratchbuilt model of flying house from the new  Pixar movie “Up”. I haven’t seen the movie yet (still not open in cinemas in Ireland) but I loved the trailer and this colorful piece of architecture.  I needed to have it in real 3d…  The design was simple, I based on pictures, movies from youtube and cut out toy from official Disney Pixar website. I started last Friday, all parts were ready on Saturday. It was going to be weekend project. So far its two weekends project and I am not yet satisfied with my paint job. I will post more photos from different angles later.

I was asked by people from forum pixarplanet.com how was it made and blueprints. Here are my drawings with all of my parts to give you better idea what was involved in process of creating it.

First drawing is prepared to be cut on 1.5mm cardboard. The blue lines are cut to 0.5 mm,  yellow is the engraving of panels on the door. I glued the parts together, I prepared little holes and joints, so all walls are at right angles and in exact positions and its quite rigid construction.

Second page is cut on 0.5 paper. Its another layer to cover joints and create window frames. I engraved the boards on the walls, but later decided that I want better 3d effect, so I covered it with overlapping stripes of paper.

Last page is with 3 types of shingles and boards for wall and is cut out of 0.3mm paper.  If you have any questions, feel free to ask on my email or post a comment.

Here you have few photos of my weekend project. I prepared my drawings a while ago, and decided to cut it now. It is my new master for resin casting. Its made of cardboard, bricks and some war damage is engraved on surface. I will patch few places with putty, add more cracks and texture to plaster, add some details like broken glass, timber joists and a little plush teddy bear on the floor Then I will sand it in some places, prime it and its ready for silicone mould. Anybody wants one?

Its all laser cut from 1.5mm and 0.5mm cardboard.  Bricks are made in two passes : first  is engraving for about 0.4mm deep, then  mortar line is cut for another 0.4mm. Floors are cut from one 1.5mm cardboard (the shape with joists) than on top of it is a 0.5mm paper layer with timber boards. Bottom side is again timber boards and another layer with peeling plaster ceiling.

Here you have few photos of my weekend project. I prepared my drawings a while ago, and decided to cut it now. It is my new master for resin casting. Its made of cardboard, bricks and some war damage is engraved on surface. I will patch few places with putty, add more cracks and texture to plaster, add some details like broken glass, timber joists and a little plush teddy bear on the floor Then I will sand it in some places, prime it and its ready for silicone mould. Anybody wants one?

Its all laser cut from 1.5mm and 0.5mm cardboard.  Bricks are made in two passes : first  is engraving for about 0.4mm deep, then  mortar line is cut for another 0.4mm. Floors are cut from one 1.5mm cardboard (the shape with joists) than on top of it is a 0.5mm paper layer with timber boards. Bottom side is again timber boards and another layer with peeling plaster ceiling.

Here you have few photos of my weekend project. I prepared my drawings a while ago, and decided to cut it now. It is my new master for resin casting. Its made of cardboard, bricks and some war damage is engraved on surface. I will patch few places with putty, add more cracks and texture to plaster, add some details like broken glass, timber joists and a little plush teddy bear on the floor Then I will sand it in some places, prime it and its ready for silicone mould. Anybody wants one?

Its all laser cut from 1.5mm and 0.5mm cardboard.  Bricks are made in two passes : first  is engraving for about 0.4mm deep, then  mortar line is cut for another 0.4mm. Floors are cut from one 1.5mm cardboard (the shape with joists) than on top of it is a 0.5mm paper layer with timber boards. Bottom side is again timber boards and another layer with peeling plaster ceiling.

All of my moulds are finished. This is my first cast assembled.  It is painted with base colours. It will take a lot of time to paint and weather it. I will describe this process later in short tutorial.

All of my moulds are finished. This is my first cast assembled.  It is painted with base colours. It will take a lot of time to paint and weather it. I will describe this process later in short tutorial.

All of my moulds are finished. This is my first cast assembled.  It is painted with base colours. It will take a lot of time to paint and weather it. I will describe this process later in short tutorial.

Most of my parts are already done. This is my first  cast assembled and primed white. You see here 9 main parts and another 8 small details. I need to pour the silicone on 2 more pieces and I can finish this model.

Most of my parts are already done. This is my first  cast assembled and primed white. You see here 9 main parts and another 8 small details. I need to pour the silicone on 2 more pieces and I can finish this model.

Most of my parts are already done. This is my first  cast assembled and primed white. You see here 9 main parts and another 8 small details. I need to pour the silicone on 2 more pieces and I can finish this model.

I cut this elevation few weekends ago. My friend from university sent me his survey drawing of  this beautiful tenement-house in Poland. I thought it may be a nice element for the wargame table or diorama. I am going to make damaged version of this building   in the near future. It will be in scale 1:100 to fit the Flames of War figures.

I cut this elevation few weekends ago. My friend from university sent me his survey drawing of  this beautiful tenement-house in Poland. I thought it may be a nice element for the wargame table or diorama. I am going to make damaged version of this building   in the near future. It will be in scale 1:100 to fit the Flames of War figures.

I cut this elevation few weekends ago. My friend from university sent me his survey drawing of  this beautiful tenement-house in Poland. I thought it may be a nice element for the wargame table or diorama. I am going to make damaged version of this building   in the near future. It will be in scale 1:100 to fit the Flames of War figures.

This is my favourite part of the building. I think that asymmetrical tower captured my attention when I was passing by that church. It has 8  little columns on the perimeter and looked complicated at first moment, but it was very easy to make.

I started with 50 cross sections laser cut in 1.5mm cardboard. Then  filled spaces between pillars with green stuff and sculpted stone. It will be primed later and cast as single resin part.

This is my favourite part of the building. I think that asymmetrical tower captured my attention when I was passing by that church. It has 8  little columns on the perimeter and looked complicated at first moment, but it was very easy to make.

I started with 50 cross sections laser cut in 1.5mm cardboard. Then  filled spaces between pillars with green stuff and sculpted stone. It will be primed later and cast as single resin part.

This is my favourite part of the building. I think that asymmetrical tower captured my attention when I was passing by that church. It has 8  little columns on the perimeter and looked complicated at first moment, but it was very easy to make.

I started with 50 cross sections laser cut in 1.5mm cardboard. Then  filled spaces between pillars with green stuff and sculpted stone. It will be primed later and cast as single resin part.

Those are my first casts of 3 finished parts.  I used polyurethane Axson F16 resin. Very quick de-moulding time (2.5m pot life, de-mould 20 – 30 minutes).  It has low viscosity so  it flows like water to all details.  Silicone mould rubber T20. Its hard to get those materials here in Dublin so I ordered it at http://www.tiranti.co.uk.  It arrived quickly and well packed. The bad surprise was delivery cost over 20£ for 4 kg parcel.

Those are my first casts of 3 finished parts.  I used polyurethane Axson F16 resin. Very quick de-moulding time (2.5m pot life, de-mould 20 – 30 minutes).  It has low viscosity so  it flows like water to all details.  Silicone mould rubber T20. Its hard to get those materials here in Dublin so I ordered it at http://www.tiranti.co.uk.  It arrived quickly and well packed. The bad surprise was delivery cost over 20£ for 4 kg parcel.

Those are my first casts of 3 finished parts.  I used polyurethane Axson F16 resin. Very quick de-moulding time (2.5m pot life, de-mould 20 – 30 minutes).  It has low viscosity so  it flows like water to all details.  Silicone mould rubber T20. Its hard to get those materials here in Dublin so I ordered it at http://www.tiranti.co.uk.  It arrived quickly and well packed. The bad surprise was delivery cost over 20£ for 4 kg parcel.